Oregon Scientific
From WeatherCat Wiki (Mahler)
(Difference between revisions)
(Added some general information and how to reset the data logger.) |
|||
Line 1: | Line 1: | ||
− | WeatherCat | + | WeatherCat supports the WMR 88, WMR 968 and WMR 200 stations. The WMR 88 and WMR 200 are USB based stations and do not require a USB to serial converter or driver. The WMR 968 will require a suitable serial to USB converter and drivers. |
== Troubleshooting tips == | == Troubleshooting tips == | ||
− | If you are having problems you might try resetting the data logger. The steps are: | + | If you are having problems with a WMR 200 you might try resetting the data logger. The steps are: |
# Press clock area until DATA LOGGER is displayed. | # Press clock area until DATA LOGGER is displayed. |
Latest revision as of 22:51, 8 October 2014
WeatherCat supports the WMR 88, WMR 968 and WMR 200 stations. The WMR 88 and WMR 200 are USB based stations and do not require a USB to serial converter or driver. The WMR 968 will require a suitable serial to USB converter and drivers.
[edit] Troubleshooting tips
If you are having problems with a WMR 200 you might try resetting the data logger. The steps are:
- Press clock area until DATA LOGGER is displayed.
- Press and hold MEM.
- All LED icons will light up and turn off consecutively (right to left). Delete process is complete and successful after blinking of last icon .
- If that does not clear memory, remove AC power and batteries for 30 seconds and reapply power. You will need to reprogram the console after a power reset.