Server Setup

From WeatherCat Wiki (Mahler)
(Difference between revisions)
Jump to: navigation, search
(Created page with "This procedure allows you to use a WeatherCat Client to access your weather station over the Internet. Five steps: 1. Get a host name from Dny.com 2. Reserve a local IP Add...")
 
 
(11 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
Five steps:
 
Five steps:
  
1. Get a host name from Dny.com
+
1. Get a host name from Dyn.com
  
 
2. Reserve a local IP Address for the host computer
 
2. Reserve a local IP Address for the host computer
Line 15: Line 15:
  
  
1. Get a host name from Dny.com
+
'''1. Get a host name from Dny.com'''
  
  
 
Go to dyn.com.
 
Go to dyn.com.
  
Select "DNS".
+
Select '''DNS'''.
  
Select "Remote Access DynDNS Pro".
+
Select '''Remote Access DynDNS Pro'''.
  
 
Follow the directions. There is a 14-day free trial available.
 
Follow the directions. There is a 14-day free trial available.
Line 35: Line 35:
  
  
2. Reserve a local IP Address for the host computer
+
'''2. Reserve a local IP Address for the host computer'''
  
  
Line 42: Line 42:
 
You need to have the router assign a reserved IP address for the host computer.
 
You need to have the router assign a reserved IP address for the host computer.
  
The steps for the Netgear Router WDR3700v2:
+
The steps for the Netgear Router N600 WNDR3700v2:
  
 
www.routerlogin.net
 
www.routerlogin.net
  
Select "Attached Devices" under "Maintenance".
+
Select '''Attached Device''' under '''Maintenance'''.
  
 
Find the host computer in the list. Make a note of the MAC Address and Device Name.
 
Find the host computer in the list. Make a note of the MAC Address and Device Name.
  
Select "LAN Setup" under "Advanced".
+
Select '''LAN Setup''' under '''Advanced'''.
  
Select "Add" under "Address Reservation".
+
Select '''Add''' under '''Address Reservation'''.
  
Enter an IP address (EG 192.168.1.101), the MAC Address. and the Device Name. Select "Apply".
+
Enter an '''IP address''' (EG 192.168.1.101), the '''MAC Address'''. and the '''Device Name'''. Select '''Apply'''.
  
 
Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.
 
Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.
  
 +
[[File:AddressReservation.jpg]]
  
3. Add Port Forwarding
+
The steps for the Pace 4111N Gateway:
  
 +
Go to 192.168.1.254 in your web browser.
  
The steps for the Netgear Router WDR3700v2 (this and other routers are covered in the Wiki topic [[Port Forwarding]]):
+
Select "Settings - LAN - IP Address Allocation"
  
Select "Port Forwarding/Port Triggering" under "Advanced"
+
Select the device that is hosting WeatherCat.
  
Select "Port Forwarding" (usually already selected)
+
Select Address Assignment: Private Fixed: 192.168.1.101
  
Click "Add Custom Service"
+
[[File:Pace Server IP Assignment.jpg]]
  
Service Name - WeatherCat
+
'''3. Add Port Forwarding'''
  
Protocol - TCP/UDP
 
  
Starting Port - 49250
+
The steps for the Netgear Router N600 WNDR3700v2 (''this and other routers are covered in the Wiki topic'' [[Port Forwarding]]):
  
Ending Port - 49254
+
Select '''Port Forwarding/Port Triggering''' under '''Advanced'''.
  
Server IP Address - The local IP address for the host computer that you reserved in step (2).
+
Select '''Port Forwarding''' (usually already selected).
  
 +
Click '''Add Custom Service'''.
  
4. Enable the server in WeatherCat
+
'''Service Name''' - WeatherCat
  
 +
'''Protocol''' - TCP/UDP
  
Select "Advanced" in WeatherCat's Preferences.
+
'''Starting Port''' - 49250
  
Check "Enable WeatherCat Server" under "Client Connections".
+
'''Ending Port''' - 49255 (note, image shows 49254)
  
 +
'''Server IP Address''' - The local IP address for the host computer that you reserved in step (2).
  
5. Enter your new host name in the WeatherCat client.
+
[[File:PortsCustomServicesAfter_101.jpg]]
  
  
Select "Preferences" or "Settings" in your WeatherCat client app.
+
'''4. Enable the server in WeatherCat'''
 +
 
 +
 
 +
Select '''Advanced''' in WeatherCat's Preferences.
 +
 
 +
Check '''Enable WeatherCat Server''' under '''Client Connections'''.
 +
 
 +
 
 +
'''5. Enter your new host name in the WeatherCat client.'''
 +
 
 +
 
 +
Select '''Preferences''' or '''Settings''' in your WeatherCat client app.
  
 
Enter the host name you selected in step (1) into the URL.
 
Enter the host name you selected in step (1) into the URL.
  
Select "Internet".
+
Select '''Internet'''.
 +
 
 +
[[File:Settings_Network_yourname_320.jpg]]
  
 
You can now use the WeatherCat client to access your weather station from the Internet.
 
You can now use the WeatherCat client to access your weather station from the Internet.

Latest revision as of 23:23, 22 January 2020

This procedure allows you to use a WeatherCat Client to access your weather station over the Internet.

Five steps:

1. Get a host name from Dyn.com

2. Reserve a local IP Address for the host computer

3. Add Port Forwarding

4. Enable the server in WeatherCat

5. Enter your new host name in the WeatherCat client.


1. Get a host name from Dny.com


Go to dyn.com.

Select DNS.

Select Remote Access DynDNS Pro.

Follow the directions. There is a 14-day free trial available.

A User Guide is provided with the software.

Select a host name (EG yourname.dyndns.org)

Download and install the software on the host computer (the computer that's running WeatherCat.)

Be sure to install and run the Dyn Client as instructed.


2. Reserve a local IP Address for the host computer


A local IP address is assigned by your router to each computer in your network.

You need to have the router assign a reserved IP address for the host computer.

The steps for the Netgear Router N600 WNDR3700v2:

www.routerlogin.net

Select Attached Device under Maintenance.

Find the host computer in the list. Make a note of the MAC Address and Device Name.

Select LAN Setup under Advanced.

Select Add under Address Reservation.

Enter an IP address (EG 192.168.1.101), the MAC Address. and the Device Name. Select Apply.

Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.

AddressReservation.jpg

The steps for the Pace 4111N Gateway:

Go to 192.168.1.254 in your web browser.

Select "Settings - LAN - IP Address Allocation"

Select the device that is hosting WeatherCat.

Select Address Assignment: Private Fixed: 192.168.1.101

Pace Server IP Assignment.jpg

3. Add Port Forwarding


The steps for the Netgear Router N600 WNDR3700v2 (this and other routers are covered in the Wiki topic Port Forwarding):

Select Port Forwarding/Port Triggering under Advanced.

Select Port Forwarding (usually already selected).

Click Add Custom Service.

Service Name - WeatherCat

Protocol - TCP/UDP

Starting Port - 49250

Ending Port - 49255 (note, image shows 49254)

Server IP Address - The local IP address for the host computer that you reserved in step (2).

PortsCustomServicesAfter 101.jpg


4. Enable the server in WeatherCat


Select Advanced in WeatherCat's Preferences.

Check Enable WeatherCat Server under Client Connections.


5. Enter your new host name in the WeatherCat client.


Select Preferences or Settings in your WeatherCat client app.

Enter the host name you selected in step (1) into the URL.

Select Internet.

Settings Network yourname 320.jpg

You can now use the WeatherCat client to access your weather station from the Internet.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools