Server Setup

From WeatherCat Wiki (Elgar)
(Difference between revisions)
Jump to: navigation, search
Line 20: Line 20:
 
Go to dyn.com.
 
Go to dyn.com.
  
Select "DNS".
+
Select '''DNS'''.
  
Select "Remote Access DynDNS Pro".
+
Select '''Remote Access DynDNS Pro'''.
  
 
Follow the directions. There is a 14-day free trial available.
 
Follow the directions. There is a 14-day free trial available.
Line 46: Line 46:
 
www.routerlogin.net
 
www.routerlogin.net
  
Select "Attached Devices" under "Maintenance".
+
Select '''Attached Device''' under '''Maintenance'''.
  
 
Find the host computer in the list. Make a note of the MAC Address and Device Name.
 
Find the host computer in the list. Make a note of the MAC Address and Device Name.
  
Select "LAN Setup" under "Advanced".
+
Select '''LAN Setup''' under '''Advanced'''.
  
Select "Add" under "Address Reservation".
+
Select '''Add''' under '''Address Reservation'''.
  
Enter an IP address (EG 192.168.1.101), the MAC Address. and the Device Name. Select "Apply".
+
Enter an '''IP address''' (EG 192.168.1.101), the '''MAC Address'''. and the '''Device Name'''. Select '''Apply'''.
  
 
Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.
 
Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.
Line 63: Line 63:
  
  
The steps for the Netgear Router N600 WNDR3700v2 (this and other routers are covered in the Wiki topic [[Port Forwarding]]):
+
The steps for the Netgear Router N600 WNDR3700v2 (''this and other routers are covered in the Wiki topic'' [[Port Forwarding]]):
  
Select "Port Forwarding/Port Triggering" under "Advanced"
+
Select '''Port Forwarding/Port Triggering''' under '''Advanced'''.
  
Select "Port Forwarding" (usually already selected)
+
Select '''Port Forwarding''' (usually already selected).
  
Click "Add Custom Service"
+
Click '''Add Custom Service'''.
  
Service Name - WeatherCat
+
'''Service Name''' - WeatherCat
  
Protocol - TCP/UDP
+
'''Protocol''' - TCP/UDP
  
Starting Port - 49250
+
'''Starting Port''' - 49250
  
Ending Port - 49254
+
'''Ending Port''' - 49254
  
Server IP Address - The local IP address for the host computer that you reserved in step (2).
+
'''Server IP Address''' - The local IP address for the host computer that you reserved in step (2).
  
 
[[File:PortsCustomServicesAfter.jpg]]
 
[[File:PortsCustomServicesAfter.jpg]]
Line 87: Line 87:
  
  
Select "Advanced" in WeatherCat's Preferences.
+
Select '''Advanced''' in WeatherCat's Preferences.
  
Check "Enable WeatherCat Server" under "Client Connections".
+
Check '''Enable WeatherCat Server''' under '''Client Connections'''.
  
  
Line 95: Line 95:
  
  
Select "Preferences" or "Settings" in your WeatherCat client app.
+
Select '''Preferences''' or '''Settings''' in your WeatherCat client app.
  
 
Enter the host name you selected in step (1) into the URL.
 
Enter the host name you selected in step (1) into the URL.
  
Select "Internet".
+
Select '''Internet'''.
  
 
[[File:Settings_Network_yourname_320.jpg]]
 
[[File:Settings_Network_yourname_320.jpg]]
  
 
You can now use the WeatherCat client to access your weather station from the Internet.
 
You can now use the WeatherCat client to access your weather station from the Internet.

Revision as of 20:25, 18 April 2012

This procedure allows you to use a WeatherCat Client to access your weather station over the Internet.

Five steps:

1. Get a host name from Dny.com

2. Reserve a local IP Address for the host computer

3. Add Port Forwarding

4. Enable the server in WeatherCat

5. Enter your new host name in the WeatherCat client.


1. Get a host name from Dny.com


Go to dyn.com.

Select DNS.

Select Remote Access DynDNS Pro.

Follow the directions. There is a 14-day free trial available.

A User Guide is provided with the software.

Select a host name (EG yourname.dyndns.org)

Download and install the software on the host computer (the computer that's running WeatherCat.)

Be sure to install and run the Dyn Client as instructed.


2. Reserve a local IP Address for the host computer


A local IP address is assigned by your router to each computer in your network.

You need to have the router assign a reserved IP address for the host computer.

The steps for the Netgear Router N600 WNDR3700v2:

www.routerlogin.net

Select Attached Device under Maintenance.

Find the host computer in the list. Make a note of the MAC Address and Device Name.

Select LAN Setup under Advanced.

Select Add under Address Reservation.

Enter an IP address (EG 192.168.1.101), the MAC Address. and the Device Name. Select Apply.

Disconnect and reconnect the host computer from the router to have the router assign the reserved IP address.

AddressReservation.jpg

3. Add Port Forwarding


The steps for the Netgear Router N600 WNDR3700v2 (this and other routers are covered in the Wiki topic Port Forwarding):

Select Port Forwarding/Port Triggering under Advanced.

Select Port Forwarding (usually already selected).

Click Add Custom Service.

Service Name - WeatherCat

Protocol - TCP/UDP

Starting Port - 49250

Ending Port - 49254

Server IP Address - The local IP address for the host computer that you reserved in step (2).

PortsCustomServicesAfter.jpg


4. Enable the server in WeatherCat


Select Advanced in WeatherCat's Preferences.

Check Enable WeatherCat Server under Client Connections.


5. Enter your new host name in the WeatherCat client.


Select Preferences or Settings in your WeatherCat client app.

Enter the host name you selected in step (1) into the URL.

Select Internet.

Settings Network yourname 320.jpg

You can now use the WeatherCat client to access your weather station from the Internet.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools