WeatherCat Webtags with Cumulus Equivalents
From WeatherCat Wiki (Mahler)
Revision as of 02:08, 4 February 2013 by Uncle Buck (Talk | contribs)
After spending time working on the Stainless Steel Gauges and getting them to work with WeatherCat, this document will contain the webtags required to get the gauges working.
The rest will be available shortly, but here is a start.
| SS-Gauges Tag | Cumulus Tag | WeatherCat Tag | Description | Notes |
|---|---|---|---|---|
| date | <#Date> | de$ | The current date | |
| timeUTC | <#timeUTC> | DUTC$ | The current UTC time | Format must be "yyyy,m,d,h,m,s" |
| SS-Gauges Tag | Cumulus Tag | WeatherCat Tag | Description | Notes |
|---|---|---|---|---|
| tempunit | <#tempunit> | TEMPUNITS$ | Temperature units being used | Possible values are C and F |
| windunit | <#windunit> | WINDSPEEDUNITS$ | Windspeed units being used | Possible values are km/h, MPH, Knots or m/s |
| pressunit | <#pressunit> | PRESSUREUNITS$ | Pressure units being used | Possible values are mBar, in Hg or hPa |
| rainunit | <#rainunit> | RAINUNITS$ | Rain units being used | Possible values are mm or inches |
| SS-Gauges Tag | Cumulus Tag | WeatherCat Tag | Description | Notes |
|---|---|---|---|---|
| temp | <#temp> | STAT$TEMPERATURE:CURRENT$ | The current outside temperature | |
| tempTL | <#tempTL> | STAT$TEMPERATURE:MIN:TODAY$ | Lowest outside temperature today | |
| TtempTL | <#TtempTL> | STAT$TEMPERATURE:MIN:TODAY:TIME$ | Time of lowest outside temperature today | |
| tempTH | <#tempTH> | STAT$TEMPERATURE:MAX:TODAY$ | Highest outside temperature today | |
| TtempTH | <#TtempTH> | STAT$TEMPERATURE:MAX:TODAY:TIME$ | Time of highest outside temperature today | |
| temptrend | <#temptrend> | STAT$TEMPERATURE:DELTA1$ | The average rate of change in temperature over the last three hours | Weathercat does not have a "direct" translation of this value so it is manipulated within the gauges.js file |
| intemp | <#intemp> | STAT$INTTEMPERATURE:CURRENT$ | The current inside temperature |
