WeatherCat Webtags with Cumulus Equivalents
From WeatherCat Wiki (Mahler)
Revision as of 02:43, 4 February 2013 by Uncle Buck (Talk | contribs)
After spending time working on the Stainless Steel Gauges and getting them to work with WeatherCat, this document will contain the webtags required to get the gauges working.
The rest will be available shortly, but here is a start.
| SS-Gauges Tag | Cumulus Tag | WeatherCat Tag | Description | Notes |
|---|---|---|---|---|
| Date/Time Tags | ||||
| date | <#Date> | de$ | The current date | |
| timeUTC | <#timeUTC> | DUTC$ | The current UTC time | Format must be "yyyy,m,d,h,m,s" |
| Unit Tags | ||||
| tempunit | <#tempunit> | TEMPUNITS$ | Temperature units being used | Possible values are C and F |
| windunit | <#windunit> | WINDSPEEDUNITS$ | Windspeed units being used | Possible values are km/h, MPH, Knots or m/s |
| pressunit | <#pressunit> | PRESSUREUNITS$ | Pressure units being used | Possible values are mBar, in Hg or hPa |
| rainunit | <#rainunit> | RAINUNITS$ | Rain units being used | Possible values are mm or inches |
| Temperature Tags | ||||
| temp | <#temp> | STAT$TEMPERATURE:CURRENT$ | The current outside temperature | |
| tempTL | <#tempTL> | STAT$TEMPERATURE:MIN:TODAY$ | Lowest outside temperature today | |
| TtempTL | <#TtempTL> | STAT$TEMPERATURE:MIN:TODAY:TIME$ | Time of lowest outside temperature today | |
| tempTH | <#tempTH> | STAT$TEMPERATURE:MAX:TODAY$ | Highest outside temperature today | |
| TtempTH | <#TtempTH> | STAT$TEMPERATURE:MAX:TODAY:TIME$ | Time of highest outside temperature today | |
| temptrend | <#temptrend> | STAT$TEMPERATURE:DELTA1$ | The average rate of change in temperature over the last three hours | Weathercat does not have a "direct" translation of this value so it is manipulated within the gauges.js file |
| intemp | <#intemp> | STAT$INTTEMPERATURE:CURRENT$ | The current inside temperature | |
| Dewpoint Tags | ||||
| dew | <#dew> | STAT$DEWPOINT:CURRENT$ | The outside dew point | |
| dewpointTL | <#dewpointTL> | STAT$DEWPOINT:MIN:TODAY$ | Today's lowest dew point | |
| TdewpointTL | <#TdewpointTL> | STAT$DEWPOINT:MIN:TODAY:TIME$ | Time of today's lowest dew point | |
| dewpointTH | <#dewpointTH> | STAT$DEWPOINT:MAX:TODAY$ | Today's highest dew point | |
| TdewpointTH | <#TdewpointTH> | STAT$DEWPOINT:MAX:TODAY:TIME$ | Time of today's highest dew point | |
| Apparent Temperature Tags | ||||
| apptemp | <#apptemp> | AT_Aus$ | The apparent outside temperature | The WeatherCat tag used could also be AT_US$ for the US calculation |
| apptempTL | <#apptempTL> | N/A | Today's lowest apparent outside temperature | WeatherCat does not have an equivalent tag |
| TapptempTL | <#TapptempTL> | N/A | Time of today's lowest apparent outside temperature | WeatherCat does not have an equivalent tag |
| apptempTH | <#apptempTH> | N/A | Today's highest apparent outside temperature | WeatherCat does not have an equivalent tag |
| TapptempTH | <#TapptempTH> | N/A | Time of today's highest apparent outside temperature | WeatherCat does not have an equivalent tag |
