WeatherCat Webtags with Cumulus Equivalents
From WeatherCat Wiki (Mahler)
Revision as of 04:30, 4 February 2013 by Uncle Buck (Talk | contribs)
After spending time working on the Stainless Steel Gauges and getting them to work with WeatherCat, this document will contain the webtags required to get the gauges working.
The rest will be available shortly, but here is a start.
SS-Gauges Tag | Cumulus Tag | WeatherCat Tag | Description | Notes | |
---|---|---|---|---|---|
Date/Time Tags | |||||
date | <#Date> | de$ | The current date | ||
timeUTC | <#timeUTC> | DUTC$ | The current UTC time | Format must be "yyyy,m,d,h,m,s" | |
Unit Tags | |||||
tempunit | <#tempunit> | TEMPUNITS$ | Temperature units being used | Possible values are C and F | |
windunit | <#windunit> | WINDSPEEDUNITS$ | Windspeed units being used | Possible values are km/h, MPH, Knots or m/s | |
pressunit | <#pressunit> | PRESSUREUNITS$ | Pressure units being used | Possible values are mBar, in Hg or hPa | |
rainunit | <#rainunit> | RAINUNITS$ | Rain units being used | Possible values are mm or inches | |
Temperature Tags | |||||
temp | <#temp> | STAT$TEMPERATURE:CURRENT$ | The current outside temperature | ||
tempTL | <#tempTL> | STAT$TEMPERATURE:MIN:TODAY$ | Lowest outside temperature today | ||
TtempTL | <#TtempTL> | STAT$TEMPERATURE:MIN:TODAY:TIME$ | Time of lowest outside temperature today | ||
tempTH | <#tempTH> | STAT$TEMPERATURE:MAX:TODAY$ | Highest outside temperature today | ||
TtempTH | <#TtempTH> | STAT$TEMPERATURE:MAX:TODAY:TIME$ | Time of highest outside temperature today | ||
temptrend | <#temptrend> | STAT$TEMPERATURE:DELTA1$ | The average rate of change in temperature over the last three hours | Weathercat does not have a "direct" equivalent of this value so it is manipulated within the gauges.js file | |
intemp | <#intemp> | STAT$INTTEMPERATURE:CURRENT$ | The current inside temperature | ||
Dewpoint Tags | |||||
dew | <#dew> | STAT$DEWPOINT:CURRENT$ | The outside dew point | ||
dewpointTL | <#dewpointTL> | STAT$DEWPOINT:MIN:TODAY$ | Today's lowest dew point | ||
TdewpointTL | <#TdewpointTL> | STAT$DEWPOINT:MIN:TODAY:TIME$ | Time of today's lowest dew point | ||
dewpointTH | <#dewpointTH> | STAT$DEWPOINT:MAX:TODAY$ | Today's highest dew point | ||
TdewpointTH | <#TdewpointTH> | STAT$DEWPOINT:MAX:TODAY:TIME$ | Time of today's highest dew point | ||
Apparent Temperature Tags | |||||
apptemp | <#apptemp> | AT_Aus$ | The apparent outside temperature | The WeatherCat tag used could also be AT_US$ for the US calculation | |
apptempTL | <#apptempTL> | N/A | Today's lowest apparent outside temperature | WeatherCat does not have an equivalent tag | |
TapptempTL | <#TapptempTL> | N/A | Time of today's lowest apparent outside temperature | WeatherCat does not have an equivalent tag | |
apptempTH | <#apptempTH> | N/A | Today's highest apparent outside temperature | WeatherCat does not have an equivalent tag | |
TapptempTH | <#TapptempTH> | N/A | Time of today's highest apparent outside temperature | WeatherCat does not have an equivalent tag | |
Windchill Tags | |||||
wchill | <#wchill> | STAT$WINDCHILL:CURRENT$ | The current wind chill temperature | ||
wchillTL | <#wchillTL> | STAT$WINDCHILL:MIN:TODAY$ | Today's lowest wind chill | ||
TwchillTL | <#TwchillTL> | STAT$WINDCHILL:MIN:TODAY:TIME$ | Time of today's lowest wind chill | ||
Heatindex Tags | |||||
heatindex | <#heatindex> | STAT$HEATINDEX:CURRENT$ | Current heat index | ||
heatindexTH | <#heatindexTH> | STAT$HEATINDEX:MAX:TODAY$ | Today's highest heat index | ||
TheatindexTH | <#TheatindexTH> | STAT$HEATINDEX:MAX:TODAY:TIME$ | Time of today's highest heat index | ||
Humidex Tags | |||||
humidex | <#humidex> | HUMIDEX$ | Current Humidex | ||
Windspeed Tags | |||||
wlatest | <#wlatest> | STAT$WINDSPEED:CURRENT$ | Current wind speed | ||
wspeed | <#wspeed> | STAT$WINDSPEED:AVERAGE:HRS(0.17)$ | The 10-minute average wind speed | ||
windTM | <#windTM> | STAT$AVERAGEWINDSPEED:MAX:TODAY$ | Today's maximum (average) wind speed | ||
wgust | <#wgust> | STAT$WINDGUST:MAX:HRS(0.17)$ | The highest wind reading in the last 10 minutes | ||
wgustTM | <#wgustTM> | STAT$WINDGUST:MAX:TODAY$ | Today's maximum wind gust | ||
TwgustTM | <#TwgustTM> | STAT$WINDGUST:MAX:TODAY:TIME$ | Time of today's maximum wind gust | ||
Tbeaufort | <#Tbeaufort> | N/A | Today's highest wind speed, expressed in the Beaufort scale | WeatherCat does not have an equivalent tag | |
Wind Bearing Tags | |||||
bearing | <#bearing> | STAT$WINDDIRECTION:CURRENT$ | Current wind bearing in degrees | ||
avgbearing | <#avgbearing> | STAT$WINDDIRECTION:AVERAGE:HRS(0.17)$ | Average wind bearing in degrees over last 10 minutes. | Range 1-360, 0=Calm | |
bearingTM | <#bearingTM> | MAXGUSTDIR(TODAY)$ | The wind bearing at the time of today's high gust (<#wgustTM>) in degrees | ||
BearingRangeFrom10 | <#BearingRangeFrom10> | WINDBEARINGFROM10$ | The 'lowest' clockwise bearing in the last 10 minutes, rounded down to nearest 10 degrees | ||
BearingRangeTo10 | <#BearingRangeTo10> | WINDBEARINGTO10$ | The 'highest' clockwise bearing in the last 10 minutes, rounded down to nearest 10 degrees | ||
Windrun Tags | |||||
WindRoseData | <#WindRoseData> | WINDROSE8$ | A comma-separated list of the wind 'totals' used to draw the wind rose | Must be surrounded by [ and ] (i.e. [WINDROSE8$]) [WINDROSE45$] could also be used | |
windrun | <#windrun> | STAT$WINDRUN:TOTAL:TODAY$ | The total wind run so far today | ||
Pressure Tags | |||||
press | <#press> | STAT$PRESSURE:CURRENT$ | The sea level pressure | ||
pressTL | <#pressTL> | STAT$PRESSURE:MIN:TODAY$ | Today's lowest pressure reading | ||
TpressTL | <#TpressTL> | STAT$PRESSURE:MIN:TODAY:TIME$ | Time of today's lowest pressure reading | ||
pressTH | <#pressTH> | STAT$PRESSURE:MAX:TODAY$ | Today's highest pressure reading | ||
TpressTH | <#TpressTH> | STAT$PRESSURE:MAX:TODAY:TIME$ | Time of today's highest pressure reading | ||
pressL | <#pressL> | STAT$PRESSURE:MIN:ALLTIME$ | All time low pressure | ||
pressH | <#pressH> | STAT$PRESSURE:MAX:ALLTIME$ | All time high pressure | ||
presstrendval | <#presstrendval> | STAT$PRESSURE:DELTA1$ | The average rate of pressure change over the last three hours. | Weathercat does not have a "direct" equivalent of this value so it is manipulated within the gauges.js file. | |
Rain Tags | |||||
LastRainTipISO | <#LastRainTipISO> | RLDi$ | Date/time of last rain gauge tip (e.g 2010-09-06 06:09) | WeatherCat does not include the time in tag | |
hourlyrainTH | <#hourlyrainTH> | STAT$RAIN:MAX:TODAY$ | Today's highest hourly rain | ||
ThourlyrainTH | <#ThourlyrainTH> | STAT$RAIN:MAX:TODAY:TIME$ | Time of today's highest hourly rain | ||
rfall | <#rfall> | STAT$RAIN:TOTAL:TODAY$ | The total rainfall so far today | ||
rrate | <#rrate> | STAT$RAIN:CURRENT$ | The current rainfall rate | ||
rrateTM | <#rrateTM> | STAT$RAIN:MAX:TODAY$ | Today's maximum rain rate | ||
TrrateTM | <#TrrateTM> | STAT$RAIN:MAX:TODAY:TIME$ | Time of today's maximum rain rate | ||
Humidity Tags | |||||
hum | <#hum> | STAT$EXTHUMIDITY:CURRENT$ | The current outside humidity | ||
humTL | <#humTL> | STAT$EXTHUMIDITY:MIN:TODAY$ | Today's lowest humidity | ||
ThumTL | <#ThumTL> | STAT$EXTHUMIDITY:MIN:TODAY:TIME$ | Time of today's lowest humidity | ||
humTH | <#humTH> | STAT$EXTHUMIDITY:MAX:TODAY$ | Today's highest humidity | ||
ThumTH | <#ThumTH> | STAT$EXTHUMIDITY:MAX:TODAY:TIME$ | Time of today's highest humidity | ||
inhum | <#inhum> | STAT$INTHUMIDITY:CURRENT$ | The current inside humidity | ||
UV Tags | |||||
UV | <#UV> | STAT$UV:CURRENT$ | Current UV index. | Requires UV sensor | |
Solar Tags | |||||
SolarRad | <#SolarRad> | STAT$SOLAR:CURRENT$ | Current solar radiation. | Requires solar sensor | |
CurrentSolarMax | <#CurrentSolarMax> | STAT$SOLAR:MAX:TODAY$ | Current theoretical maximum solar radiation | Requires solar sensor | |
Misc Tags | |||||
SensorContactLost | <#SensorContactLost> | COMMSFAILFLAG$ | Station comms ok? | 0 if the station comms are good or 1 if the comms have failed (hardware fail or stale data) | |
forecast | <#forecast> | CF$ | The current forecast | ||
version | <#version> | BD$ | The version of the application used to generate the data file | ||
build | <#build> | N/A | The build of the application used to generate the data file | WeatherCat does not have an equivalent tag | |
ver | N/A | 9 | The version of this JSON file | As of this writing, the current version is 9 |